WAC Lighting EN-24100-RB2-T 120V Input 24V Output 100W Remote

Condition - Very Good
The item shows wear from consistent use, but it remains in good condition and functions properly. Item may arrive with damaged packaging or be repackaged. It may be marked, have identifying markings on it, or have minor cosmetic damage. It may also be missing some parts/accessories or bundled items.

WAC Lighting EN-24100-RB2-T 120V Input 24V Output 100W Remote Enclosed Electronic Transformer for InvisiLED Tape Light, Black
- Soft start, short and overload circuit protection features. For use with WAC Lighting low Voltage under cabinet and recessed Lighting systems
- 1W minimum load to support low load LED systems. Intrinsically safe, class 2 Transformers permit no greater than a 5 amp current to be drawn
- Secondary wiring for class 2 Transformers does not require Conduit sheathed cable or clamp wiring techniques. Non-metallic sheathed cable may be used for secondary wiring in walls and ceilings
- Input Voltage: 120V AC, output Voltage: 24V AC, loads vary based on transformer 60Watt, 100Watt, 150Watt, and 300Watt
- Smooth and continuous dimming with an electronic low Voltage dimmer. Dimmers should always be installed on the primary side of the transformer. Standards: class 2, UL & CUL listed for Damp locations
- 6' lead wire with female connector is included
- 24V, 96W maximum load capacity - Requires a minimum load of 1W for consistent operation
- Max run 100W: 25'
- Dimming with Electronic Low Voltage dimmers
- Dimensions: 6 5/8" L x 1 5/8" W x 1 1/8" H

Country	USA
Brand	WAC Lighting
Manufacturer	WAC Lighting
Binding	Tools & Home Improvement
ItemPartNumber	EN-24100-RB2-T
Model	EN-24100-RB2-T
Warranty	Five (5) year manufacturer limited warranty.
Color	Black
Size	100 Watts Hardwired
UnitCount	1
UPCs	790576163925
EANs	0790576163925
ReleaseDate	0000-00-00

WAC Lighting EN-24100-RB2-T 120V Input 24V Output 100W Remote Enclosed Electronic Transformer for InvisiLED Tape Light, Black